The functionality and usage of the following Tab-Windows
•Tab-Window: Simulations
•Tab-Window: C-Profiles
•Tab-Window: Surface Concentrations
•Tab-Window: Data Fitting
•Tab-Window: Chi²-Tests
•Tab-Window: Compare Curves
•Tab-Window: Plot Graph
•Tab-Window: Comments
is the same as described for the CA-Simulation Document. Only the Tab-Window: Experiments is replaced by the Tab-Window: GAMRY Experiments. While the first one enables the user to import CA-experiments in ASCII-file format (for using the imported CA-experiments in a Data Fitting Project) the second one is designed for conducting CA experiments directly from within DigiElch on condition that
1.a potentiostat from GAMRY-Instruments (Warminster, USA) is connected to the computer running DigiElch
2.the modules supporting the potentiostat are activated in your DigiElch license.
Note that the tab of the Tab-Window is changed from GAMRY Experiments to Potentiostat_Name Experiments as soon as the potentiostat is connected to DigiElch. Currently potentiostats referring to the Potentiostat_Name
▪Reference 600
▪Reference 600 Plus
▪Interface 1000
are supported by DigiElch.
The experimental CVs measured in the Tab-Window: Potentiostat_Name Experiments can be directly used in a data fitting project. There is, however, one important difference: The parameters associated with the experiments imported into the Tab-Window: Experiments can be freely modified (without destroying the current curve) by means of the Edit/Modify command while the Edit command on the Tab-Window: Potentiostat_Name Experiments may destroy the measured current curve if Scan Parameters or Instrumental Parameters are modified.
